To install a gym mirror it is necessary to have tape, measurement an area, a pencil, as well as screws. For the first step, you need to place the cardboard against the wall and lay the mirror over it. Wipe the wall clean where you’re planning to set the mirror. If you don’t clean the walls where you want it to go could result in the glue to break off. Use a level and a pencil for laying the mirror. Four holes should be drilled in the wall near the location of the mirror. It should be joined with four anchors. The rubber strips should be placed into the Jbar. It is important to ensure that they are 14 of the distance. Join the J-hooks onto the mirror so that it’s straight. Slowly, but carefully pull the mirror toward you. Distribute mirror glue over the rear of the mirror equally dispersing it. Make sure to tilt the mirror correctly as you put it on the J-bar. The mirror clips should be screwed in to the anchors which you’ve installed in the wall. This is a complicated procedure, however if you comply with these instructions to follow, you will be able to complete the task faster. For further information, take a look at this instructional video. xt26gj3cp6.
